Traction and Compression Testing of Packaging with the TCT-2
Updated: Oct 12
The TCT-2 Traction and Compression Tester by AT2E measures the resistance of all kinds of packaging to tear (traction) or top load (compression). It complies with the ISBT voluntary standard test methods for PET bottles, and its user-defined test cycles adapt it to customers' in-house standards.
How the test works
Install the sample on the support.
The force is raised gradually in the tear or top load direction.
The sample is compressed or torn until the maximum force, or according to the testing distance set.
Read the value on the touch screen; a report is printed.
The distance between the gauge, the support plate and the column can be adjusted on request.
Product description
The AT2E TCT-2 measures the resistance of all kinds of packaging to tear or top load force (traction or compression). The sample is installed on the support and the force is raised gradually in the tear or top load direction, until the maximum force or according to the testing distance set. The value is read on the touch screen and a report is printed. The TCT-2 complies with the ISBT voluntary standard test methods for PET bottles, and its user-defined test cycles make it compatible with any in-house standard.
Key features
Perfectly parallel plates
Automatic force recording
Touch screen display
Predefined testing distance and testing speed
Tests with a preload force or a pre-stretching distance
Both compression (top load) and traction (pull) tests
User-defined test cycle (up to 4 steps of force and holding time)
Memory of 30 products, 10 operators, batch number and sample number (all password-protected)
Stores up to 1000 test results
Easy sample installation
All cycle information displayed: time, setting, operator, product, batch No., sample No., value
Real-time test curve review
RS232 outputs
Stainless steel design for durability
Overload protection
Safety design
Technical specifications
Measuring range: 0-1500 N (larger on order)
Traction range: 0-500 N (larger on order)
Resolution: 0.01 N
Accuracy: ±0.5% F.S.
Sample range: max. diameter 130 mm, max. height 420 mm (larger on order)
Power supply: AC 220 V (AC 110 V optional)
Dimensions: 500 (L) x 400 (W) x 910 (H) mm
Weight: 50 kg
Optional
Calibration pack
Mini printer
Custom-made fixture for the sample
"QualiForce" software
Fixtures for other tests: tamper-evident band breaking, tube test, flip top, disk top, push and pull, cover opening, pump push force, breaking and tube removal tests
Frequently asked questions
What is the primary function of the TCT-2 Traction and Compression Tester?
The TCT-2 measures the resistance of packaging to tear (traction) and top load (compression) forces with perfectly parallel plates, over a range of 0-1500 N in compression and 0-500 N in traction, with a resolution of 0.01 N.
How many test steps can the TCT-2 program?
The TCT-2 supports user-defined cycles with up to 4 steps of force and holding time, stores 30 products and 10 operators, and displays real-time test curves on its touch screen.
What optional accessories extend the TCT-2 capability?
Options include a calibration pack, a mini printer, custom-made fixtures for specific samples and the QualiForce software for data management and analysis.
What are the physical specifications of the TCT-2?
The TCT-2 has a stainless steel design with overload protection and RS232 outputs. It measures 500 x 400 x 910 mm and weighs 50 kg.
Request a quote
AT2E is an ISO 9001 certified company (AFNOR Certification).
Request a quote: info@at2e.com
I think this article does an excellent job of taking the reader through all the equipment that comes with the TCT 2 as well as its many uses. In my own experience when learning about these kinds of technologies it always helps to have some really good explanations for each piece of equipment involved. This article did just that and it was very similar to having some nursing thesis help.