TCT-2
Tensile and compression tester
Features :
• Measuring range: 0-500 / 0-1000 / 0-2000 / 0-5000 N (others on request)
• Device with motorized column and position memory
• Automatic recording and display of peak value strength
PLC Touchscreen
• 4 cycles with respectively 1, 2, 3, 4 levels of applicable force and holding time
• Storage of 30 products, 10 operators, batch number entry
• Ease of sample setup.
• Stores up to 1000 test results
Displays the maximum and minimum measured values and curve, and prints three types of reports: Valid, Non-compliant, or Failure
RS, USB, or Ethernet output
• Protection against mechanical overloads
Secure device
Maximum height of 420 mm (Larger sizes available on request)
Dimensions: (L x W x H): 500 x 400 x 910 mm
• Sample range: max. diameter of 130 mm,
Maximum height of 420 mm (Larger sizes available on request)
Dimensions: (L x W x H): 500 x 400 x 910 mm
• Sample range: max. diameter of 130 mm,
• Measuring range: 0-1500 N (larger ranges available on request)
• Traction range: 0-500 N (higher on request)
• Resolution: 0.01N
• Accuracy: ±0.5% FS
• Power supply: 110/230VAC 50-60Hz
• Weight: approximately 50 kg
Options:
• Calibration module
Custom lighting
Qualiforce software
Use :
Description :
The TCT 2 measures the resistance to force (tensile or compressive) of all packaging.
The sample is placed in a holder and gradually forced upwards or stretched towards/against the plate or jaws.
A column that can be adjusted in height and speed allows the device to be adapted to different tests.
The sample is crushed or stretched after the peak force has been applied, representing the maximum load the sample can withstand. The maximum value is displayed on the user-friendly, multi-function touchscreen. Compliant with ISBT requirements and recommendations.
DCCF-1
FT-1
PATT-1
BT ETA FORCE
BT ETA FORCE SHF
CET-1
STS-1
POT-AUTO
POT-1
DYNA-4000
