Checking Torque On the Spot with the TORQUE CHECK Hand Held Controller
Updated: 6 days ago
The TORQUE CHECK by AT2E is a hand held torque controller. Operators use it to control the torque on a cap, calibration teams to check quickly the accuracy of any torque tester, and maintenance teams to control and adjust the torque directly under the capping heads, with no dismantling.
How the test works
Install the TORQUE CHECK on the torque tester, on the cap or under the capping head.
Turn slowly and smoothly in the opening or closing direction.
Read the torque on the digital display, in continuous or peak mode.
The TORQUE CHECK can be equipped with custom-made cones for different cap sizes.
Product description
The TORQUE CHECK has been developed to allow operators to control the torque, calibration teams to check quickly the accuracy of any torque tester, and maintenance teams to control and adjust the torque directly on capping heads. It is easy to use: install it on the torque tester, on the cap or under the capping head, and turn slowly and smoothly in the opening or closing direction. Like all AT2E torque testers, it is designed with a special mechanical system for measuring torque, which cancels most non-coaxial and top load influences on the measurement for maximum repeatability.
Key features
Digital display
Measures in opening and closing directions
2 measuring modes: continuous and peak
Measurement memory with curves (by software)
Loading and transfer by USB (PC)
Built-in battery (3 hours)
Designed on request according to customer drawings
Custom-made cones for different cap sizes
Ready to be installed on a torque tester, on a cap or under a capping head
No dismantling needed to control the capping heads
Transport case
Technical specifications
Measuring range: 00.00 to 60.00 kgf.cm
Units: kgf.cm / inch.lbs / N.m
Accuracy: 0.5% of full scale
Power supply: AC 110-240 V 50/60 Hz
Battery: built-in, 3 hours
Weight: 0.5 kg
Optional
Additional cone
BT ETA MEASURE software
Frequently asked questions
What is the primary function of the TORQUE CHECK?
The TORQUE CHECK is a hand held torque controller that measures torque in the opening and closing directions, from 00.00 to 60.00 kgf.cm, with an accuracy of 0.5% of full scale. It is used on a cap, on a torque tester or under a capping head.
How is the TORQUE CHECK powered?
The TORQUE CHECK has a built-in battery (3 hours) and an AC 110-240 V 50/60 Hz power supply. Measurements and curves are transferred to a PC by USB.
Can the TORQUE CHECK be installed directly under a capping head?
Yes. The TORQUE CHECK is ready to be installed under the capping head, so the maintenance team can control and adjust the capping heads with no dismantling.
Request a quote
AT2E is an ISO 9001 certified company (AFNOR Certification).
Request a quote: info@at2e.com
Comments