TORQUE CHECK
Handheld Torque Controller
Technical characteristics :
·Use via digital screen.
· Screwing and unscrewing measurements
· Measuring range: from 00.00 to 60.00 Kgf.cm
· 2 measurement modes (continuous, peak).
· Units: Kgf.cm / Inch.lbs / Nm / N.cm.
· Accuracy: ±0.5% of full scale.
· USB charging (PC)
· Delivered calibrated COFRAC certificate
· Transport case
· 110/240 V - 50/60 Hz
· Production of custom formats / IP 64.
· Built-in 3H battery
· Weight 0.5 kg
Description :
TORQUE CHECK lets operators check tightening and loosening torques, metrology managers quickly verify the accuracy of their torque meters, and maintenance teams check the settings of screwing heads without dismantling them. Easy to use: simply fit TORQUE CHECK onto the item to be checked and turn it in the tightening or loosening direction.
Options:
Use :
· Installs directly under the screw head, on a torque meter or on a plug.
· Allows you to control the screw heads.
· No disassembly required!!
FAQ
What is the primary function of the TORQUE CHECK device?
TORQUE CHECK is a portable torque tester for screwing/unscrewing measurement, covering 00.00 to 60.00 Kgf.cm with a remote digital display and ±0.5% full-scale accuracy.
How is the TORQUE CHECK powered and how long does the battery last?
The TORQUE CHECK uses 110/240V 50/60Hz power with an integrated 3-hour rechargeable battery, making it suitable for spot-checks on capping heads without disassembly.
Can TORQUE CHECK be installed directly under a capping head?
Yes, the TORQUE CHECK installs directly under the screwing head after filling, allowing torque verification at real production speed without dismounting the line.
Similar devices:
TORQUE TESTERS
CALIBRATION PACK
BT ETA TORQUE ECO
BT ETA COUPLE
ADATMV5 S
ADATMV5
.jpg)
ADATMV ECO
TMV8
TMV ECO
TMV7
