APPARATUS FOR BOTTLES AND PREFORMS PACKAGING ANALYSIS
PET-AXL-100 PET Bottle Axial Load Tester 
How to test : The sample is placed on the test platform which rises till it touches the upper board. Rise speed and the distance between test platform and upper board can be adjusted. The maximum pressure is displayed on the screen when the sample is out of shape by pressing.
- Features:
- • It's a standard equipment in PET Bottle making industry.
- • Accurate design and parallel platen ensure sample is suffered by real axial load pressure
- • Display and record the maximum pressure value automatically.
- • PLC touching screen control.
- • Steady press speed. Collecting data automatically by microcomputer system.
- • Test platform will restore to origin automatically when the test if finished. Users can get the sample conveniently after the test.
- • Single result can be checked after several tests. Counting the average value, maximum value and minimum value automatically.
- • Applicable to samples of various heights.
- • Over loading protection.
- Technical data:
- Measure range : 500 N
- Accuracy : 0.1N
- Data output : RS232
- Power supply : 240V AC 50-60Hz
- Dimension : 500 mm x 400 mm x 600 mm (W x D x H )
- Net weight : 67 kg
PEBT-2 PET Bottle Pressure Tester
• International commonly used testing method
• Touch-screen, display the real-time testing pressure
“PEBT-2 PET Bottle Pressure Tester” is an advance testing equipment specialized for testing the PET bottles. It has been designed in conformity to the three international commonly used testing methods, users can select the testing method according to their requirement. PEBT-2 is able to test the pressure capabilities that under a set pressure or the burst test.
By the means of replenishing pressurization, the pressurizing process was linearized, and to increase until reaching the set point or burst point.
After the selection of testing program, PEBT-2 will run automatically accord with the settings. The Touch-screen will display the real-time pressure value and record down the max. pressure and burst pressure.
• Measure range: 0 - 2Mpa (290Psi)
• Resolution: 0.01Mpa
• Max. sample capability: 3 L
• Power supply: 115/230V, 50 - 60Hz
• Rear Panel: RS232 serial output
• Dimension: 830×580× 1600mm (WxDxH)
• Weight: 120KG
BPT-2 Bottle Ramp Pressure Tester
|
|
The “ BPT-2 Bottle Ramp Pressure Tester” is an advanced testing instrument for pressure testing glass containers. Pressure test containers to a predefined pressure point (proof testing) or to destruction. The BPT-2 Bottle Ramp Pressure Tester is ergonomically designed for ease of operation and maintenance, and fully conforms to international test requirements.
- Features
- *Industry Standard
- * Safety interlocks on test chamber doors
- *Precision application of pressure per requirements
- *Durable Load Cell Design
- *Program Logic Control System (PLC) Controlled
- *LCD touch-screen Display
- *Rs-232 Communications Capability
- *Display the max. and min. measuring value and average after several test.
- Technical data (Changes reserved):
- Measure range: 0-57bar
- Resolution: 0.1 bar
- Pressure slope : 0.4MPa/Sec
- Rear Panel: RS232 serial output
- Power supply: 115 V / 230 V , 50-60Hz
- Dimensions: 830mm × 580mm × 1600mm (W x D x H )
- Weight: 120 kg
FGJ Manual Crown Sealing Machine
The “KZJ-FGJ Manual Crown Sealing Machine” is a lab using manual crown sealing machine, it is applicable to various kinds of wine and soft drink bottles.
Bottle volume: 250 ? 375 ? 500 ? 640ML
VAT-300
Perpendicularity tester for bottle (Auto)
The “KZJ-VAT-300 Perpendicularity tester for bottle (Auto)” is for measuring the perpendicularity deviation of glass bottles. With the data processor, the KZJ-VAT-300 is able to collect the measuring data from the Mitutoyo digital indicator and show the results automatically.
Technical data:
Sample diameter: max. 120mm (bigger by order)
Measure range: 0 -10mm
Resolution: 0.01mm
Dimensions: L280×W180×H 380mm
Weight: 12.5kg
PEPT-100
Perpendicularity Tester for PET Bottle (Digital)
Perpendicularity Tester for PET Bottle which is equipped with Mitutoyo digital gauge is used to measure the perpendicularity of PET Bottle.
Technical data:
Sample range: 90mm ( other diameters can be custom-made )
Measure range: 0 -10mm
Accuracy: 0.01mm
Dimension: L350×W250×H 370mm
Net weight: 12.5 kg
PETG-200
PET Bottle Embryo Thickness Gauge (Digital)
PETG-200 PET Bottle Embryo Thickness Gauge is used to measure the embryo thickness of PET Bottle.
Easy-handling design and invariablenes measure pressure let operator get the accurate measure result easily.
This gauge is consisted of measure clamp and Mitutoyo gauge.
Technical data:
Measure range: 0 -10mm
Accuracy: 0.001mm
PETG-100
PET Bottle Embryo Thickness Gauge (Analog)
PETG-100 PET Bottle Embryo Thickness Gauge is used to measure the embryo thickness of PET Bottle.
Easy-handling design and invariablenes measure pressure let operator get the accurate measure result easily.
This gauge is consisted of measure clamp and analog indicator (dial indicator)
Technical data:
Measure range: 0 -10mm
Resolution: 0.01mm ,
Accuracy: ± 0.02mm
POLARISCOPE
The polariscope permits to clearly detect the default of injection and moulding on preform
We advise to choose the defect chart for prefrom and polariscope in the same time
HOT WIRE CUTTER 
The HWC permits to cut accuratly all kind of PET bottle to prepare packagings tests
APPARATUS FOR CANS and END CANS PACKAGING ANALYSIS
AXL-4000 Axial Load Tester 
The “ AXL-4000 Axial Load Tester” measures the axial force resistance of beverage cans in Newton . The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display
• Industry Standard
• Exceptionally Parallel Platens
• Auto record and display the peak force value
• Touch-screen PLC Controlled
• Stable pressing process, data collected automatically by the microcomputer controlling system
• Pressure plate auto reset after the test is finished. Convenience for placing / taking out the samples.
• Display the max. and min. measuring value and average after several test.
• Applicable for samples of different dimension.
• Mechanical Overload Protection
Technical data:
Measure range : 3000 N
Resolution : 1N
Rear Panel : RS232
Power supply : 240VAC 50-60Hz
Dimensions : 500 mm x 400 mm x 600 mm (W x D x H )
Weight : 50 kg
BDG-100 Bottom Depth Gauge
BDG-100 Bottom depth Gauge is a Digital gauges for measuring Bottom depth parameters at beverage cans. With the Mitutoyo 0.01mm Resolution Digital Indicator.
Mitutoyo Standard SPC Data Output
Easy to read digital display
Requires little training and is extremely easy touse
Technical data:
Resolution: 0, 01 mm
CBT-100 Buckle Tester Bottom for Can 
The “ CBT-100 Buckle Tester Bottom for Cans” determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses.
The empty flanged can or straight wall can is placed in the holder. After covering the device with a plexiglass hood pressure is applied. The can is sealed with a rubber o-ring structure. Fast pressure increase up to 5 bar (programmable to just bellow the expected buckle value), from there the „speed of pressure increase“ may be set within the device. The test is terminated as soon as the can buckles. The maximum pressure value is shown in the display.
Any can of var ious diameter and height may be tested: inserts are available that can be exchanged within seconds.
Feature:
• Industry Standard
• Applicable for empty necked-in cans and straight wall can
• RS 232C data output, able to transfer the data to SPC system
• Touch-screen PLC Controlled System, data collected automatically.
• Pressing speed is adjustable and the Pressure curve can be set
• High accuracy
• Test Point for Calibration
• Display the max. and min. measuring value and average after several tests
• Multi- safety design
• Mechanical Overload Protection
Technical data:
Measure range : 0-900 Kpa ( 0.9Mpa )
Resolution : 1 KPa
Rear Panel : RS 232C
Power supply : 230V/50Hz
Pneumatic supply : 1.0 Mpa
Dimensions : 600 x 450 x 430 mm
Weight : 40kg
CHG-d Digital Can Height Gauge
The CHG-d Digital Can Height Gauge can be used to measure the height of beverage, food, and aerosol cans. Constant measuring force for accurate, repeatable, user-independent results. With the Mitutoyo 0.01mm Resolution Digital Indicator. If you purchase the adapter and cable, the instrument can communicate with a computer.
Option Calibration piece: 60mm ; 88.4mm ; 111.2mm ; 115.2mm ; 134mm ; 168mm ; etc
Technical data (changes reserved):
Resolution: 0.01 mm
Accuracy: 0, 02 mm
Tailor-made Digital Can Height Gauge for Straight Wall Cans
CMD-200 Can Measure Desk for Rear Stations
CMD-200 Can Measure Desk for Rear Stations is developed on basis of the long experience of Rear stations in 2 piece can product line.
CMD-200 Measure Flange width , Bottom depth, can height, Internal Diameter. It is equipped with Mitutoyo 0.01mm Resolution Digital Indicator, If you purchase the multiplexer and cable, the instrument can communicate with SPC system or a computer.
Technical data:
Resolution: 0.01mm
FWG-100-d ? FWG-200-d ? FWG-300-d
Flange Width Gauge
FWG-100-d FWG-200-d ? FWG-300-d
The “FWG-100-d Flange width gauges” is designed to measure the flange width of open ended cans. The spring loaded can guides automatically position the can for fast, accurate, and repeatable measurements. Constructed of machined for corrosion resistance and long life. The base plate is stainless steel to extend the wear life of the surface. With the Mitutoyo 0.01mm Resolution Digital Indicator. The gauges may be connected to a computer via a multiplexer.
Technical data (changes reserved):
Resolution: 0, 01 mm
Sample Capacity
FWG-100-d: 50 -90mm dia.
FWG-200-d: 50 -200mm dia.
FWG-300-d: 50 -300mm dia.
Bigger by order
IDG-100 // IDG-200
Can Internal Diameter Gauge
This unit serves for quickly checking the Internal Diameter of can. It is equipped with a calibration piece.
IDG-100 is for small diameter cans ; Cans dia. 52 -100 mm (only measure one type can),
IDG-200 is for big diameter cans; Cans dia. :80 -260 mm (only measure one type can)
One type cans must equip with one calibration pieces and one set of measure blocks (change parts).
If you must measure several type cans, you can order several pcs of IDG-100 or IDG-200.
Or you can order several psc of calibration pieces and several sets of measure blocks.
It is equipped with a digital dial gauge with "reset" and "preset" function, LCD display and data outlet for connecting the unit to a computer via multiplexer, if required.
Technical data:
Resolution: 0, 01 mm
Power supply: Battery , SR-44, approx.5.000 h
Accuracy: 0.01mm
SLG-d Seam Length Gauge
The SLG-d Seam length gauge can be used to measure Seam length (Seam height).
Can is positoned by standing up during measuring. With the Mitutoyo 0.01mm Resolution Digital Indicator. If you purchase the adapter and cable, the instrument can communicate with a computer.
Technical data:
Measurement range: 0 -7mm
Resolution: 0.01mm
STG-200-d Seam Thickness Gauge (Digital)
The STG-200-d Seam thickness gauge can be used to measure Seam thickness. With measure angle compensation. The center measure point can be adjusted. Cans can be auto - positioned in the center easily during measuring. With the Mitutoyo 0.01mm Resolution Digital Indicator.
If you purchase the adapter and cable, the instrument can communicate with a computer.
Technical data:
Measurement range: 0 -6mm (other measure range could be customized)
Resolution: 0.01mm
>STR-100 Seam Stripper
The automatic “STR-100 Seam Stripper” is a sensible, affordable, teardown method to prepare the double seam teardown analysis. One fast, safe teardown operation without damaging or distorting the cover hook. Reduce teardown time for more frequent inspections. Tooling quick change in few seconds. Models are available for most common can sizes of beverage, food, and aerosol cans. When ordering, the end diameter and can height must be specified so that the appropriate change parts are included. Efficient cut and strip both aluminium and steel cans in a single motion. 10 seconds per can. Eliminates the repetitious actions by hand.
An important part of any seam evaluation is the actual teardown of the can seam to determine tightness or wrinkle rating.
WTG-100 Wall Thickness Gauge for Trimmed 2-Piece Cans
Measure Topwall Thickness and Midwall Thickness with this gauge for Trimmed 2-Piece Cans.
Available for any Trimmed 2-Piece Cans of any height, the Wall Thickness Gauge measures topwall and midwall thickness. The digital dial indicators measure to 0,001 mm (0.00005) resolution.
Mitutoyo Standard SPC Data Output
Easy to read digital display
Requires little training and is extremely easy touse
Technical data (changes reserved):
Resolution: 0.001 mm
Accuracy: 0, 01 mm
BDD-200 Bead Depth Gauge (Digital)
BDD-200 Bead Depth Gauge is for measuring the bead depth of the can body.
BDD-200 has the fine designed can holder, which ensures the cans keep still during the measuring, and the results are more accuracy.
To purchase the data processor, it is able to collect the readings from the indicator and calculate the bead depth automatically. Or to purchase the transmitter and cable, it is able to transfer the data to computer or SPC system, so that to avoid the rates of man-made mistake.
Technical data:
Measure range: 0 -10mm (change by order)
Graduation: 0.01mm
CSS-300 Seam Saw
--- Applicable for all can types, especially for large paint cans, rectangle cans
“CSS-300 Seam saw” is a special seam circular saw with double cut for double seam inspections. The CSS 300 has specially designed for the irregular shaped can s, like rectangle cans, oval cans, etc. Also aerosol-cans can also be sawed with the saw. The nitrated blades achieve together with the speed of approx. 1.000 r/min. so that comes a very plain cut surface. The seam image on the Canneed series of Automatic Seam Monitors gets thereby very clear and improves measurement speed and reliability.
Technical data (changes reserved):
Sample can dia. : 45 -360mm (bigger by order)
Sample type : 2 piece cans, 3 piece cans, and aerosol cans
Saw blades: 100 x 22 x 0, 5 mm (also available with 80 x 22 x 0, 5 mm )
Speed: approx. 1.000 r/min.
Power supply: 220 V
Power: 100 W
Dimensions: L420 × W320 × H 150mm
Weight: 30kg
CSS-200 Seam Saw
“CSS-200 Seam saw” is a special seam circular saw with double cut for double seam inspections. The CSS 200 was specially designed for 2- and 3-piece can s. Also aerosol-cans may be sawed with this saw. The nitrated blades achieve together with the speed of approx. 1.000 r/min. a very plain cut surface. The seam image on Caneed series Automatic Seam Computer (Video Seam Monitors), and automatic seam measuring systems gets thereby very clear and improves measurement speed and reliability.
Safety design: In front of the saw blade, there was a proximity sensor, if the non-metal material get close above the sensor, the saw will not start even if the power switch is on, so that to minimize the accidents caused by the faulty operation or carelessness.
VRM 3A Video Rivet monitor
--- rivet quality of the ends
Familiar Defect of Rivet
Normal |
Crinkle |
Crack |
Off the ring |
The “ VRM 3A Video Rivet monitor“ is a Video camera system to observe and evaluate the rivet profile images of ends. Any end of varying diameter may be tested . The end is cut through the rivet by the low speed saw, the rivet is positioned manually in front of the camera. The rivet profile images display on the display. The “ VRM 3A Video Rivet monitor“ can be used with monitor to just observe and evaluate the rivet profile images. The “ VRM 3A Video Rivet monitor“ also can be used with a PC to be a compact measuring system. Within VRM image archive software the computer offers a measurement. This may be stored in computer or printed out on a laserprinter.
CAN-1050 Can Closing Force Gauge
“CAN-1050 Can Closing Force Gauge” is for measuring the force of seaming head of the seaming machine. Advantages:
• Deduct the scrap rate of the production
• Shorten the adjusting time, improved production efficiency.
• Improved the seam quality
Technical data:
Measure range: 25 -500 lbs . / 10-230 Kgs.
Resolution: 5 lbs . Each
Load ability: 1200 lbs .
CDG-100 Curl Diameter Gauge
--- Measure Curl Diameter for Ends
The “CDG-100 Curl Diameter Gauge” is a Digital gauges for measuring Curl Diameter of ends . It is equipped with a calibration piece. With the Mitutoyo 0.01mm Resolution Digital Indicator.
It is equipped with a digital dial gauge with “reset” and “preset” function, LCD display and data outlet for connecting the unit to a computer via multiplexer, if required.
Technical data (changes reserved):
Resolution: 0, 01 mm
Power supply: Battery , SR-44, approx.5.000 h
CSM-147 Can Seam Micrometers
CSM-147-1; CSM-147-2; CSM-147-3
CSM-147-1; CSM-147-2; CSM-147 can measure the seam thinness and length for straight wall cans.
CSM-147-1can also measure the countersink.
CSM-147-3 is for measuring the seam thickness and length of necked-in cans.
Technical data:
Measure range:
Seam thickness: 0 - 9.00mm ,
Length: 0 - 9.00mm ;
Countersink: 0 - 5.00mm
Resolution: 0.01mm
DHG-300 Digital Can Height Gauge
The “DHG-300 Digital Can Height Gauge” can be used to measure the height of beverage, food, and aerosol cans. With the 0.01mm Resolution Digital Indicator.
Technical data (changes reserved):
Measure range:
0 -300mm , DHG-300
0 -600mm , DHG-600
Resolution: 0.01 mm
Accuracy: 0, 02 mm
ECH-d End Curl Height Gauge
The “ ECH-d End Curl Height Gauge” is a Digital gauges for measuring Curl Height of ends . With the Mitutoyo 0.01mm Resolution Digital Indicator. If you purchase the adapter and cable, the instrument can communicate with a computer.
Technical data (changes reserved):
Resolution: 0, 01 mm
Power supply: Battery , SR-44, approx.5.000 h
CSS-100B Anti-noise Seam Saw
“CSS-100B Anti-noise seam saw” is provided with an anti-noise design and a special guide for 2- and 3-piece cans ( 65 mm dia.). Special seam circular saw with double cut for can double seam inspections. The CSS 100B was specially designed for 2- and 3-piece cans. The nitrated blades achieve together with the speed of approx. 1.000 r/min. a very plain cut surface. The seam image on VSM 6A Automatic Seam Computer (Video Seam Monitors), and automatic seam measuring systems gets thereby very clear and improves measurement speed and reliability.
Technical data (changes reserved):
Sample can dia.: 65mm
Sample type : 2- and 3-piece cans.
Saw blades: 80 x 22 x 0, 5 mm , (Part No.: HSS-1-80-5)
Speed: approx. 1.000 r/min.
Power supply: 220
Power: 100W
Dimensions: L380×W240×H 200mm
Weight: 12kg
LSS-100 Low speed Saw
--- rivet quality of the ends
The " LSS-100 Low Speed Saw" is for cut the End rivet to observe and evaluate the rivet profile images of ends. It work with the "Canneed VRM 3A Video Rivet monitor”
The end is cut through the rivet by the LSS-100 Low Speed Saw, the rivet is positioned manually in front of the camera. The rivet profile images display on the display.
Use the “VRM Measuring Software” to measure the rivet quality. It is able to print the rivet profile images and data, convenient for the communication of quality control.
PDG-d Plane depth Gauge (Digital)
The “PDG-d Plane depth Gauge (Digital)” is for measuring the bottom end depth of the cans. The measuring base would be subject to the sample size, so please indicated the end size when purchasing.
To connect the PDG-d with the adapter and cable, all the measurement data can be transferred to the computer or SPC system, so that to avoid recording the data manually.
The “PDG-d Plane depth Gauge (Digital)” consists of Plane depth Gauge and calibration base.
Technical data: |
|
PTG -d Digital Plate Thickness Gauge
Measure Thickness of Tinplates
This unit serves for quickly checking the thickness of plates. The sample is presented vertically in this version. It is equipped with a digital dial gauge with "reset" and "preset" function, LCD display and data outlet for connecting the unit to a computer via multiplexer, if required.
Technical data:
Resolution: 0,001 mm
Power supply: Battery , SR-44, approx.5.000 h
Accuracy: 0,003 mm ± 1 digit Data outlet to multiplexer
PTT-200 Pop & Tear Tester
---The most advanced Pop & Tear Tester
PTT-200 Pop & Tear Tester has been developed for testing different kinds of easy open ends.
6 different types of ends: RP / SOT / EO / OVAL / SNAP and ALUFIX.
5 different testing modes: RP / SOT / EO / OVAL and SNAP.
The operators just need to hook the ring and press “test” button, then the PTT-200 will do the test automatically. During the testing process, the microprocessor will monitor and record the max. Pop and Tear force. Equip with different size of the clamps, it is able to test the different size of ends.
Feature:
• Industry Standard
• Options of CND_Track analyzing software.
• Simple operation
• Rs-232 Communications Capability, can export data to SPC.
• PLC touch-screen control system, Auto data collection.
• High accuracy
• Calibration option, convenience for calibrating.
• No need the air source
Technical data (Changes reserved):
|
|
Applicable for different kinds of Ends, easy to change the clamps
EO
|
SOT
|
RP
|
OVAL
|
ALUFIX
|
SNAP
|
|
hook the ring and press “test” button
CND_Track analyzing software
VSM 3A + Automatic Seam Monitor
VSM 3A + Automatic Seam Monitor CSS-200 Seam Saw ( Option )
VSM 3A + Automatic Seam Monitor has adopted the advanced optical system and Golden Lens TM video capture device, which ensured the high image definition and the measurement accuracy. The VSM 3A + Automatic Seam Monitor is equipped with the professional seam measuring software CanNeed CND_VSM3.0. The software also adopted the data base management system, all the measurement data will be restored in the system data base, so that to enhance the software performance and more convenience in data management. The result statistic and result chart has been added in the data base screen for overview and comparison. Meanwhile, the measurement screen has been optimized for a vivid result display. The magnifier option enable users to magnify the testing image for a more accurate line positioning, so that the measurement results are more accurate and reliable.
- Features:
- • Equipped with Golden Lens TM video capture device which ensured the high image definition ;
- • Software adopted data base management system, users can review or re-measure the saved projects at any time.
- • M easuring Items: Seam Length, Body Hook Length, End Hook Length, Overlap, Seam gap, Overlap rate, Body Hook lapping rate, End Hook lapping rate, On-screen Seam Thickness
- • SPC compatible, use a data adapter to collect the data from Mitutoyo Digital Indicator ( Actual Seam Thickness; Actual countersink )
- • Measure results can automatically be stored in the Excel file format
- • Report format can be customized, flexible for different report styles of different companies.
- • Graph chart statistic function, automatically analyze and compare the measurement results.
- • Magnifier option enable users to magnify the testing image for a more accurate line positioning;
- • Measured values are displayed in on-screen and alarm if values are not within specs;
- • Seam image can be printed, stored;
- • Provided with calibration piece, calibrate at any time;
- Use the monochromatic source, make it much more durable
APPARATUS FOR AEROSOLS PACKAGING ANALYSIS
ABT-200 Burst Buckling Tester for aerosol cans 
“ ABT- 2 00 Burst Buckling Tester for Aerosol Cans” is used for testing the buckle value of bottom and end (dome) of aerosol cans and the pressure at which the can bursts.
The ABT-200 was PLC controlled, and equip with the special designed clamp device, ABT-200 is able to test the buckle value of free ends (dome) or bottom of aerosol cans independently.
The professional analyzing software of ABT-200 is able to display the pressure curve, monitor and record three buckle values: end buckle value, bottom buckle value and burst value. The database system manages the measurement result and curve, and the system will carry out the testing process automatically, so that no manual operation needed during the testing process.
Technical data:
Pneumatic supply: 0.5Mpa
Testing pressure: 0-4Mpa
Graduation: 0.01Mpa
Dimension : 555 x 400 x 860 mm (L X W X H)
Weight: 50kg
Sample type: All types of aerosol cans
