SCT-1 Stress Crack Tester | For testing internal stress in bottle base

The AT2E Stress Crack Tester is designed for testing the internal stress in a bottle’s base and for determining the stress crack resistance of blow-molded PET carbonated soft drink bottles. By measuring the propensity for base cracking upon exposure to an aqueous sodium hydroxide solution within a controlled environment, it helps evaluate the long term behavior of bottles. …

Continue reading »

Permanent link to this article: http://www.at2e.com/sct-1-stress-crack-tester-for-test-of-internal-stress-in-bottle-base/

SH-SF-SHF | Hand Dynamometers

SH – SF – SHF – Dynamometer DIGITAL AND ANALOG DYNAMOMETER – SIMPLE AND ACCURATE Our dynamometers include a special mechanical design to avoid all influence from non-coaxial efforts. They also include a built-in high-speed electronic reading of measurements. Our SH-SF and SHF dynamometers allow easy and accurate measurement of the strength—in traction or compression directions—for many applications. AT2E’s …

Continue reading »

Permanent link to this article: http://www.at2e.com/sh-sf-shf-hand-dynamometers/

SEAM CHECK-1 | Automatic Seam inspector for cans and aerosol cans

SeamCheck – Automatic Double Seam Inspector Seaming quality is a critical part of can inspection. And it’s one of the most important points in quality assurance for can, beverage and food manufacturing companies. AT2E’s SeamCheck Automatic Double Seam Projector provides the most convenient way to perform seam inspection.   When used with AT2E’s seam saw, a clear seam section image …

Continue reading »

Permanent link to this article: http://www.at2e.com/seam-check-1-automatic-seam-inspector/

Cap Torque Tester | TMV5

The TMV5 Touchscreen Electronic Torque Tester has been designed to fulfill high specification requirements for the packaging industry. It allows precise control to measure both the opening or closing torque of a twisting closure system, such as a plastic bottle cap.  

Permanent link to this article: http://www.at2e.com/cap-torque-tester-tmv5/

BT ETA 5 | Torque Bottle for capping head torque setting

BT ETA 5 – Touch Screen Dynamometric Torque Bottle DESIGNED TO BE INSTALLED UNDER CAPPING HEADS | CAPPING HEADS ADJUSTMENT Our Torquemeters are designed with a special mechanical system for measuring torque which cancels most non- coaxial and top load influences on the measurement. These features cancel most operator influences on the measurement for maximum …

Continue reading »

Permanent link to this article: http://www.at2e.com/bt-eta-5-torque-bottle-for-capping-head-torque-setting/

BT ETA TORQUE | Bottle TORQUE control | On line torque control

BT ETA TORQUE – Electronic Dynamometric Torque Bottle DESIGNED TO BE INSTALLED UNDER CAPPING HEADS | CAPPING HEADS ADJUSTMENT Our Torquemeters are designed with a special mechanical system for measuring torque which cancels most non- coaxial and top load influences on the measurement. These features cancel most operator influences on the measurement for maximum repeatability. …

Continue reading »

Permanent link to this article: http://www.at2e.com/bt-eta-torque-bottle-torque-control-on-line-torque-control/

Vacuum Chamber Leak Tester | VLT-PLC

The VLT PLC automated vacuum box has been designed to execute leak tests by vacuum and/or pressure on packaging. It can set and memorize parameters and cycles . It also allows the test data to be transferred to our software, and fulfills the CFR21 rules, especially important for the Pharmaceutical industry. Built with a PLC touchscreen, the unit is user-friendly …

Continue reading »

Permanent link to this article: http://www.at2e.com/vacuum-chamber-vlt-plc/

Vacuum Chamber VLT-ST | Packaging Leak Detector

The VLT ST vacuum box, has been designed to swiftly and easily execute leak tests by vacuum and/or pressure on packaging in a cost-effective way. Tests can be realized with or without water immersion to detect leaks, depending of the content of your packaging and your desired methodology. THE VLT ST model includes a stainless steel cabinet with electrical …

Continue reading »

Permanent link to this article: http://www.at2e.com/vacuum-chamber-vlt-st/

Vacuum Chamber VLT-ECO | Packaging Leak Tester

The VLT Eco vacuum box has been designed to execute leak tests on different packaging products in an easy and cost-effective way. As our other VLT-s models, it includes a robust see-through PMMA acrylic box with a vacuum generator. Very user-friendly by design, the 3-position valve allows the user to execute the following steps: Generate vacuum Hold vacuum Return to atmospheric pressure The …

Continue reading »

Permanent link to this article: http://www.at2e.com/vacuum-chamber-vlt-eco/

PLC AUTOMATED BUBBLE TESTER | LEAK TESTER BY PRESSURIZATION | SSA PLC

SSA-PLC Secure Seal Analyzer (PLC Model) (Leak test apparatus | Bubble point) AT2E SSA-PLC secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium. By vacuum technology and special design, the needle uses a function of self-holding …

Continue reading »

Permanent link to this article: http://www.at2e.com/leak-tester-by-pressurization-ssa-plc/

DIGITAL BUBBLE TESTER | LEAK TESTER BY PRESSURIZATION | SSA D

SSA-D Secure Seal Analyzer (Standard Model) (Leak test apparatus | Bubble point) AT2E SSA-D secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium. By vacuum technology and special design, the needle uses a function of self-holding …

Continue reading »

Permanent link to this article: http://www.at2e.com/digital-bubble-tester-leak-tester-by-pressurization-ssa-st/

ANALOG BUBBLE TESTER | LEAK TESTER BY PRESSURIZATION | SSA ECO

SSA-ECO Secure Seal Analyzer (ECO Model) (Leak test apparatus | Bubble point) AT2E SSA-ECO secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium. By vacuum technology and special design, the needle uses a function of self-holding …

Continue reading »

Permanent link to this article: http://www.at2e.com/analog-bubble-tester-leak-tester-by-pressurization-ssa-eco/

Motorized Cap Torque Tester ADATMV

  Motorized Torquetester | Repeatability 100% The ADATMV automated torquetester allows to control your torque without any human influence . This TOTAL abstraction of the human factor provides a high accuracy in measuring and optimization of your datas analysis in Lab or bottling line. Suitable for all kind of twist, sealed or screwed system such …

Continue reading »

Permanent link to this article: http://www.at2e.com/motorized-cap-torque-tester-adatmv5/

Acrylic Vacuum Chambers VLT | Packaging Leak Tester

AT2E’s VLT is a acrylic vacuum chamber, vacuum decay allow to perform leak test on all kind of packaging with liquid, creamy or dry products. Our boxes are made in PMMA (Polymethyl methacrylate). PMMA is a very transparent and resistant material which allows to visualize the packaging during the test is performing with safety. The wall thickness …

Continue reading »

Permanent link to this article: http://www.at2e.com/vacuum-chamber-vlt/

AMTG-2 | Accurate Magnetic Thickness Gauge

The AMTG-2 is a portable magnetic thickness gauge. It is used to measure the thickness of non-magnetic materials such as plastic, glass, ceramic, aluminum, titanium, copper, etc. The accuracy of the measurement is not affected by the shape of the samples. It’s designed using the Hall Effect principle. A simple, precise measurement is obtained using the following …

Continue reading »

Permanent link to this article: http://www.at2e.com/amtg-2-accurate-magnetic-thickness-gauge/

Perpendicularity tester for Glass Bottle | GBPT-1

GBPT-1 Glass Bottle Perpendicularity Gauge is used to measure the perpendicularity and verticality (deviation) of Glass bottle and it’s a standard equipment for Glass bottle manufacture and beverage industries. It’s applicable for various sizes of Glass bottle with the special design of clamping and rotatory system. With automatic calculator, data can be sent to the calculator …

Continue reading »

Permanent link to this article: http://www.at2e.com/perpendicularity-tester-for-glass-bottle-gbpt-1/

Automatic Hot Wire Bottle Cutter | HWBC-2

AT2E innovative HWBC-2 Hot Wire Bottle Cutter offers an automated and cost saving way for cutting containers for section weight analysis. A clean section without deformation will be obtained by a quick cutting of bottles through heated hot wires. A precision and repeatable cutting task is easy to achieve and it’s necessary for a proper …

Continue reading »

Permanent link to this article: http://www.at2e.com/hwbc-2-automatic-hot-wire-botlle-cutter/

Hot Wire Bottle Cutter | HWBC-1

The HWBC-1 Hot Wire Bottle Cutter offers an easy and cost saving way for cutting containers for section weight analysis. A clean section without deformation will be obtained by a quick cutting of bottles through heated hot wires. A precision and repeatable cutting task is easy to achieve and it’s necessary for a proper analysis. …

Continue reading »

Permanent link to this article: http://www.at2e.com/hwbc-1-hot-wire-bottle-cutter/

PPG-A | PPG-D | Preform Perpendicularity Gauge

The “PPG-A” and “PPG-D” are used to measure the perpendicularity (deviation) of the preform and it’s a standard equipment for PET and beverage industries. With special designed changing & clamping part, it can ensure the accurate measurement of different sizes of preform. The device includes a ruler on the column for a more accurate using …

Continue reading »

Permanent link to this article: http://www.at2e.com/ppg-preform-perpendicularity-gauge/

Perpendicularity tester for Plastic Bottle | PBPT-1

PBPT-1 PET Bottle Perpendicularity Gauge is used to measure the perpendicularity and verticality (deviation) of PET bottle and it’s a standard equipment for PET bottle manufacture and beverage industries. It’s applicable for various sizes of PET bottle with the special design of clamping and rotatory system. With automatic calculator, data can be sent to the …

Continue reading »

Permanent link to this article: http://www.at2e.com/perpendicularity-tester-for-plastic-bottle-pbpt-1/

Older posts «